Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 20.06.2025 00:44

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Edit 2024–10.

eight

2024–10–16 [ OO OLAOYE OYEBODE ]

I caught my neighbor leaving his 12-year-old son home alone and he has not come back in 6 hours. Should I call CPS?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The other is “what does a “fuse” do?”

Why do so many autistic adults deal with self-hatred?

I post the exact comment here.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

An AC voltage/ current source, and an ac inductive load.

Is it legal for an employer to ask why you are taking time off from work?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

What does a fuse do?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Two of my family members have recently converted to Islam and have brought shame on my family. How do I get them back into the fold of Hinduism?

2024–10–10[John johnson John Johnson ]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Have you ever seen a woman having sex with a dog?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The bolt then partially travels down the line to your home.

Upvotes:

If gays can get married, why can't I marry my dog or a cheeseburger?

This device then solves the entire problem.

For this case there are devices called Metal oxide varistors (MOV).

2024–10–14 [Omar Gharbi Omar Gharbi ]

Have you had any paranormal activity situations happen personally to you or someone you know?

A fuse is a non-resetable over current circuit protector.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This one hit behind the barn.

Who is the greatest light welterweight boxer of all time?

At least they know the answer if they wanted it.

Now when you have a certain ac resistance, then a current flows in a loop.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Gucci Owner Picks Auto Executive for One of Global Luxury’s Top Jobs - WSJ

There are two important concepts here.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

How can fashion design be used to make a political statement in popular culture, and society?

He then describes Rainy Season and Lightning.

what exactly is a ‘surge’ protector?

[image of Common-mode choke]

One is “what exactly is in a ‘surge protector’ ? ”

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Barnstars:

but I think this circuit , shows a few more pieces.

This is 'the assistant's answer'

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

[old diagram got deleted by accident]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

There are three different concepts here that are getting confused.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Because the load is inductive, the current lags the voltage.(by a bit).

This is where this question deviates from being a 'generic' question, and becomes more specific.

First Sentence:

These devices are installed between the “hot” and “neutral” and protective ground.

The third is lightning and “how it gets conducted into a home.”

This is where the MOV conducts again, and dissipated the energy.

These are simplified answers to the original question, and does not change anything I wrote above.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

It also is a device that limits the change in current flow.

But… the neutral is now “floating” because of the 1 ohm resistance.

He then describes the function of a fuse.

nine

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

It seems Mohan does not understand the difference between a comment and an Answer.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

But it can get overloaded, and no longer works.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Here is a simplified AC power diagram.

the problem then depends on "how fast does the fuse operate?".

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

One

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

He then asserts :

(Dc diagram shown, AC is similar).

so, what happens?

What is lightning?

In schematic diagrams this is the symbol for a fuse:

a photo is worth a thousand words.

A circuit breaker is similar, but is resettable.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

but this device (an Inductor) … impedes the rapid changes in the current.